Gland càball meatailt le cridhe singilte (snàithle meatrach / Pg)
Gland càball meatailt le cridhe singilte (snàithle meatrach / Pg)
Ro-ràdh
Bithear a’ cleachdadh fàireagan càbaill sa mhòr-chuid airson a bhith a’ clampadh, a’ càradh, a’ dìon nan càbaill bho uisge is duslach. Tha iad air an cur an sàs gu farsaing ann an raointean leithid bùird smachd, innealan, solais, uidheamachd meacanaigeach, trèana, motaran, pròiseactan msaa.Is urrainn dhuinn meatailt a thoirt dhutfàireagan càball le cridhe singilte air a dhèanamh de umha le nicil-plated (Òrdugh Àir .: HSM.D), stàilinn gun staoin (Àireamh Òrdugh: HSMS.D) agus alùmanum (Àireamh Òrdugh: HSMAL.D).
| Stuth: | Corp: nickel-plated brass; ròn: FR-TPE; seulachadh: rubair atharraichte |
| Raon Teòthachd: | Min -40℃,100 as àirde℃ |
| Ìre dìon: | IP68 (IEC60529) le O-ring iomchaidh taobh a-staigh raon clampaidh sònraichte |
| Feartan: | |
| Iarrtasan: | |
| Teisteanasan: | CE, RoHS |
Sònrachadh
(Cuir fios thugainn airson tuilleadh fiosrachaidh ma tha feum agad air meudan no snàithleanan eile nach eil air an liosta a leanas.)
| Artaigil àireamh. | Snàthainn | Raon clampaidh | AG | GL | (H) | Meud wrench | Pacaid |
|
| Tomhas | mm | mm | mm | mm | mm | aonadan |
| HSM.D-M12/7 | M12x1.5 | 4~7 | 12 | 6 | 19.5 | 14 | 75 |
| HSM.D-M16/7 | M16x1.5 | 4~7 | 16 | 7 | 19.5 | 18/14 | 75 |
| HSM.D-M16/9.5 | M16x1.5 | 6.5~9.5 | 16 | 7 | 20.5 | 18 | 75 |
| HSM.D-M18/7 | M18x1.5 | 4~7 | 18 | 7 | 19.5 | 20/14 | 75 |
| HSM.D-M18/9.5 | M18x1.5 | 6.5~9.5 | 18 | 7 | 20.5 | 20/18 | 75 |
| HSM.D-M20/7 | M20x1.5 | 4~7 | 20 | 7 | 20 | 22/14 | 32 |
| HSM.D-M20/9.5 | M20x1.5 | 6.5~9.5 | 20 | 7 | 21 | 22/18 | 32 |
| HSM.D-M20/13 | M20x1.5 | 9~13 | 25 | 7 | 23 | 28/26 | 18 |
| HSM.D-M25/9.5 | M25x1.5 | 6.5~9.5 | 25 | 7 | 21 | 28/18 | 18 |
| HSM.D-M25/13 | M25x1.5 | 9~13 | 25 | 7 | 24 | 28 | 18 |
| HSM.D-M25/17 | M25x1.5 | 13 ~ 17 | 32 | 7 | 23.5 | 28 | 18 |
| HSM.D-M32/13 | M32x1.5 | 9~13 | 32 | 8 | 24.5 | 36/28 | 8 |
| HSM.D-M32/17 | M32x1.5 | 13 ~ 17 | 32 | 8 | 24 | 36/28 | 8 |
| HSM.D-M32/19 | M32x1.5 | 15 ~ 19 | 32 | 8 | 25.5 | 36 | 18 |
| HSM.D-M32/22 | M32x1.5 | 18~22 | 32 | 8 | 25 | 36 | 8 |
| HSM.D-M40/19 | M40x1.5 | 15 ~ 19 | 40 | 9 | 25 | 45/36 | 8 |
| HSM.D-M40/22 | M40x1.5 | 18~22 | 40 | 9 | 25.5 | 45/36 | 8 |
| HSM.D-M40/25 | M40x1.5 | 21~25 | 40 | 9 | 28 | 45 | 8 |
| HSM.D-M40/28 | M40x1.5 | 24~28 | 40 | 9 | 27.5 | 45 | 8 |
| *HSM.D-M50/25 | M50x1.5 | 21~25 | 50 | 9 | 28 | 55/45 | 8 |
| *HSM.D-M50/28 | M50x1.5 | 24~28 | 50 | 9 | 27.5 | 55/45 | 8 |
| HSM.D-M50/33 | M50x1.5 | 28~33 | 50 | 9 | 27.5 | 55 | 8 |
| HSM.D-M50/37 | M50x1.5 | 32 ~ 37 | 50 | 9 | 29.5 | 55 | 8 |
| * HSM.D-M50/40 | M50x1.5 | 35~40 | 50 | 9 | 32 | 55 | 8 |
| * HSM.D-M63/40 | M63x1.5 | 35~40 | 63 | 10 | 32 | 70/55 | 2 |
| * HSM.D-M63/46 | M63x1.5 | 40~46 | 63 | 10 | 35 | 70 | 2 |
| *HSM.D-M63/51 | M63x1.5 | 45~51 | 63 | 10 | 35 | 70 | 2 |
