Gland càball meatailt (snàithlean meatrach)
Gland càball meatailt (snàithlean meatrach)
Ro-ràdh
Bithear a’ cleachdadh fàireagan càbaill sa mhòr-chuid airson a bhith a’ clampadh, a’ càradh, a’ dìon nan càbaill bho uisge is duslach.Tha iad air an cur an sàs gu farsaing ann an raointean leithid bùird smachd, innealan, solais, uidheamachd meacanaigeach, trèana, motaran, pròiseactan msaa.Is urrainn dhuinn glands càball meatailt a thoirt dhut airson càball armaichte air a dhèanamh le umha nicil-plated (Òrdugh Àir .: HSM-KZ), stàilinn gun staoin (Àireamh Òrdugh: HSMS-KZ) agus alùmanum (Àireamh Òrdugh: HSMAL-KZ).
| Stuth: | Corp: nickel-plated brass;ròn: polyamide;seulachadh: rubair atharraichte |
| Raon Teòthachd: | Min -40℃,100 as àirde℃,Geàrr-ùine 120℃ |
| Ìre dìon: | IP68 (IEC60529) le O-ring iomchaidh taobh a-staigh raon clampaidh sònraichte |
| Feartan: | A ’seasamh an aghaidh crathadh agus buaidh, a rèir IEC-60077-1999. |
| Iarrtasan: | Togalach inneal, uidheamachd dealain, preas smachd dealain |
| Teisteanasan: | CE, RoHS |
Sònrachadh
(Cuir fios thugainn airson tuilleadh fiosrachaidh ma tha feum agad air meudan no snàithleanan eile nach eil air an liosta a leanas.)
| Artaigil Àir. | Snàthainn | Raon clampaidh | AG | GL | (H) | SW1/SW2/SW3 | Pacaid |
|
| Tomhas | mm | mm | mm | mm | mm | Aonadan |
| * HSM-KZ-M16-DL | M16 × 1.5 | 5~10 | 16 | 10 | 35.5 | 20/21/21 | 16 |
| * HSM-KZ-M20-L | M20 × 1.5 | 6~12 | 20 | 10 | 37 | 23/23/23 | 16 |
| * HSM-KZ-M20-DL | M20 × 1.5 | 8~14 | 20 | 10 | 37 | 24/26/24 | 16 |
| * HSM-KZ-M20-TDL | M20 × 1.5 | 10~16 | 20 | 10 | 38 | 28/28/28 | 9 |
| * HSM-KZ-M25-L | M25 × 1.5 | 10~16 | 25 | 12 | 38 | 28/28/28 | 9 |
| * HSM-KZ-M25-DL | M25 × 1.5 | 13~18 | 25 | 12 | 42 | 30/30/30 | 9 |
| * HSM-KZ-M25-TDL | M25 × 1.5 | 15~22 | 25 | 12 | 43 | 36/36/36 | 18 |
| * HSM-KZ-M32-L | M32 × 1.5 | 15~22 | 32 | 12 | 43 | 36/36/36 | 9 |
| * HSM-KZ-M32-DL | M32 × 1.5 | 18~25 | 32 | 12 | 47 | 40/40/40 | 4 |
| * HSM-KZ-M40-L | M40 × 1.5 | 22 ~ 30 | 40 | 15 | 51 | 45/45/45 | 4 |
| * HSM-KZ-M50-L | M50 × 1.5 | 30~38 | 50 | 15 | 58 | 50/58/58 | 2 |
| * HSM-KZ-M50-DL | M50 × 1.5 | 37 ~ 44 | 50 | 15 | 59 | 65/65/60 | 2 |
| * HSM-KZ-M63-L | M63 × 1.5 | 37 ~ 44 | 63 | 15 | 59 | 65/65/60 | 1 |
| * HSM-KZ-M63-DL | M63 × 1.5 | 42 ~ 53 | 63 | 15 | 65 | 75/75/70 | 1 |
