Gland càball EMC (snàithle meatrach / Pg)
Gland càball EMC (snàithle meatrach / Pg)
Ro-ràdh
Bithear a’ cleachdadh fàireagan càbaill sa mhòr-chuid airson a bhith a’ clampadh, a’ càradh, a’ dìon nan càbaill bho uisge is duslach.Tha iad air an cur an sàs gu farsaing ann an raointean leithid bùird smachd, innealan, solais, uidheamachd meacanaigeach, trèana, motaran, pròiseactan msaa.
Is urrainn dhuinn fàireagan càball EMC a thoirt dhut air an dèanamh le umha nicil-plated (Òrdugh Àir .: HSM.ZX-EMV.T), stàilinn gun staoin (Àireamh Òrdugh: HSMS.ZX-EMV.T) agus alùmanum (Òrdugh Àir .: HSMAL.ZX-EMV.T).
| Stuth: | Is e am meatailt a-muigh umha nicil plating, an cridhe is e rubair Silicon a th’ ann, agus is e stàilinn gun staoin a th’ anns an earrach |
| Raon Teòthachd: | Min -50℃,150 as àirde℃ |
| Ìre dìon: | Taobh a-staigh an raon clampaidh, faodaidh an ìre dìon aige ruighinn IP68 |
| Teisteanas: | CE |
Sònrachadh
(Cuir fios thugainn airson tuilleadh fiosrachaidh ma tha feum agad air meudan no snàithleanan eile nach eil air an liosta a leanas.)
| Artaigil Àir. | Meud càball (mm) | Trast-thomhas càball (mm) | Fad an t-snàthainn (mm) | Tro cheangal Terminal | Trast-thomhas uèir èifeachdach air a chòmhdach (mm) | H(mm) | SW1/SW2 (mm) |
| HSM.ZX-EMV.T-M12/8(S) | M12×1.5 | 5~8 | 6 | 7 | 3.5-7 | 20 | 17/17 |
| HSM.ZX-EMV.T-M12/8-T | M12×1.5 | 4~8 | 6 | 7.5 | 4-7 | 33 | 17/17 |
| HSM.ZX-EMV.T-M16/8 | M16×1.5 | 5~8 | 6 | 7 | 3.5-7 | 23 | 17/18 |
| HSM.ZX-EMV.T-M16/9.5-T | M16×1.5 | 4~9.5 | 7 | 9.5 | 6.5~9 | 36 | 22/22 |
| HSM.ZX-EMV.T-M18/10 | M18×1.5 | 7~10 | 7 | 10.2 | 6~10 | 27 | 20/20 |
| HSM.ZX-EMV.T-M22/13 | M22×1.5 | 10~13 | 7 | 12 | 8~12 | 26.5 | 24/24 |
| HSM.ZX-EMV.T-M20/12 | M20×1.5 | 7~12 | 7 | 12 | 7.5~11 | 27 | 24/24 |
| HSM.ZX-EMV.T-M20/13 | M20×1.5 | 10~13 | 7 | 12 | 8~12 | 27 | 24/24 |
| HSM.ZX-EMV.T-M20/15-T | M20×1.5 | 12 ~ 14 | 7 | 14 | 11~14 | 35 | 24/24 |
| HSM.ZX-EMV.T-M25/16 | M25×1.5 | 11~16 | 7 | 15.5 | 8~15 | 32 | 30/30 |
| HSM.ZX-EMV.T-M25/17-T | M25×1.5 | 13 ~ 17 | 7 | 16.5 | 10.5~16 | 36.5 | 30/30 |
| HSM.ZX-EMV.T-M25/19-T | M25×1.5 | 12 ~ 19 | 7 | 18.5 | 12 ~ 18 | 39 | 32/32 |
| HSM.ZX-EMV.T-M25/22-T | M25×1.5 | 18~22 | 8 | 21 | 13.5~21 | 36 | 36/36 |
| HSM.ZX-EMV.T-M25/20-T | M25×1.5 | 16~20 | 7 | 19 | 12 ~ 19 | 34.5 | 30/30 |
| HSM.ZX-EMV.T-M27/17-T | M27×2.0 | 14~17 | 8 | 18 | 11~16 | 36.5 | 30/30 |
| HSM.ZX-EMV.T-M30/21 | M30×2.0 | 14~21 | 8 | 20.5 | 12.5~20 | 30 | 36/36 |
| HSM.ZX-EMV.T-M32/19 | M32×1.5 | 14~19 | 8 | 21 | 13.5~18 | 31 | 32/36 |
| HSM.ZX-EMV.T-M32/20-T | M32×1.5 | 16~20 | 8 | 19 | 12 ~ 19 | 33.5 | 30/36 |
| HSM.ZX-EMV.T-M32/21-T | M32×1.5 | 17~21 | 8 | 22 | 14.5~20 | 38 | 36/36 |
| HSM.ZX-EMV.T-M32/23 | M32×1.5 | 18~23 | 8 | 22 | 15.2~22 | 27.5 | 36/36 |
| HSM.ZX-EMV.T-M32/23-T | M32×1.5 | 18~23 | 8 | 22.8 | 14.8~22 | 36 | 36/36 |
| HSM.ZX-EMV.T-M32/25-T | M32×1.5 | 19~25 | 8 | 25 | 18~24 | 39 | 38/38 |
| HSM.ZX-EMV.T-M33/21 | M33×2.0 | 17~21 | 8 | 21 | 14~20 | 28.5 | 36/36 |
| HSM.ZX-EMV.T-P16/14 | PG16 | 10~14 | 7 | 13 | 8.5~12 | 27 | 24/24 |
| HSM.ZX-EMV.T-P21/19-T | PG21 | 14~19 | 7 | 18.5 | 13 ~ 18.5 | 40 | 32/32 |
| HSM.ZX-EMV.T-P21/20 | PG21 | 16~20 | 7 | 18 | 11~19 | 30 | 30/30 |
| HSM.ZX-EMV.T-P21/20-T | PG21 | 16~21 | 7 | 21 | 11.5~21 | 38 | 32/32 |
Iarrtas
