Cnò glas meatailt (snàthainn meatrach/pg/G)
Cnò glas meatailt (snàthainn meatrach/pg/G)
Ro-ràdh
Is urrainn dhuinn cnothan glasaidh meatailt a thoirt dhut air an dèanamh le umha nicil-plated (Òrdugh Àir .: GM), stàilinn gun staoin (Àireamh Òrdugh: GMS) agus alùmanum (Àireamh Òrdugh: GMAL).
| Stuth: | Corp: umha nicil-plated |
| Raon Teòthachd: | Min -40℃,100 as àirde℃ |
| Teisteanasan: | CE, RoHS, UL |
Sònrachadh
(Cuir fios thugainn airson tuilleadh fiosrachaidh ma tha feum agad air meudan eile nach eil air an liosta a leanas.)
| Cnò glas pràis nicil-plated (snàthainn M) | ||||
| Artaigil àireamh. | Snàthainn | meud wrench | tiughad | aonadan pacaid |
|
| Tomhas | mm | mm |
|
| GM-M10 | M10 × 1.0 | 12 | 2.5 | 50 |
| GM- M12 | M12 × 1.5 | 15 | 2.8 | 50 |
| GM-M16 | M16 × 1.5 | 19 | 2.8 | 50 |
| GM-M18 | M18 × 1.5 | 21 | 3 | 50 |
| GM-M20 | M20 × 1.5 | 23 | 3 | 50 |
| GM- M22 | M22 × 1.5 | 26 | 3 | 50 |
| GM- M24 | M24 × 1.5 | 28 | 3.5 | 50 |
| GM- M25 | M25 × 1.5 | 30 | 3.5 | 25 |
| GM- M27 | M27 × 2.0 | 32 | 4 | 25 |
| GM- M30 | M30 × 2.0 | 34 | 4 | 25 |
| GM- M32 | M32 × 1.5 | 36 | 4 | 20 |
| GM- M33 | M33 × 2.0 | 36 | 4 | 20 |
| GM- M36 | M36 × 2.0 | 40 | 4 | 20 |
| GM-M40 | M40 × 1.5 | 45 | 5 | 20 |
| GM- M42 | M42 × 2.0 | 46 | 5 | 20 |
| GM- M48 | M48 × 2.0 | 55 | 5 | 20 |
| GM-M50 | M50 × 1.5 | 55 | 5 | 20 |
| GM- M56 | M56 × 2.0 | 60 | 5 | 20 |
| GM-M60 | M60 × 2.0 | 65 | 5 | 20 |
| GM- M63 | M63 × 1.5 | 70 | 6 | 20 |
| GM- M64 | M64 × 1.5 | 70 | 6 | 20 |
| Cnò glas pràis nicil-plated (snàthainn PG) | ||||
| Artaigil àireamh. | Snàthainn | meud wrench | tiughad | aonadan pacaid |
|
| Tomhas | mm | mm |
|
| GM-P07 | PG7 | 15 | 2.8 | 50 |
| GM-P09 | PG9 | 18 | 2.8 | 50 |
| GM-P11 | PG11 | 21 | 3 | 50 |
| GM- P13.5 | PG13.5 | 23 | 3 | 50 |
| GM-P16 | PG16 | 26 | 3 | 50 |
| GM-P21 | PG21 | 32 | 3.5 | 25 |
| GM-P29 | PG29 | 40 | 4 | 20 |
| GM- P36 | PG36 | 50 | 5 | 20 |
| GM-P42 | PG42 | 60 | 5 | 20 |
| GM-P48 | PG48 | 65 | 5.5 | 20 |
|
|
|
|
|
|
| Cnò glas pràis nicil-plated (snàthainn G) | ||||
| Artaigil àireamh. | Snàthainn | meud wrench | tiughad | aonadan pacaid |
|
| Tomhas | mm | mm |
|
| GM-G3/8 | G 3/8 ″ | 20 | 3 | 50 |
| GM-G1/2 | G 1/2 ″ | 24 | 4 | 50 |
| GM-G3/4 | G 3/4 ″ | 30 | 4 | 25 |
| GM-G1 | G 1 ″ | 40 | 5 | 20 |
| GM-G1 1/4 | G 1 1/4 ″ | 50 | 5 | 20 |
| GM-G1 1/2 | G 1 1/2 ″ | 55 | 6 | 20 |
| GM-G2 | G 2 ″ | 65 | 6 | 20 |
| GM-G2 1/2 | G 2 1/2 ″ | 86 | 8 | 10 |
| GM-G3 | G 3 ″ | 100 | 8 | 10 |
