Gland càball meatailt àrd-temp le ioma-cridhe (snàthainn meatrach / PG)
Gland càball meatailt àrd-temp le ioma-cridhe (snàthainn meatrach / PG)
Ro-ràdh
Bithear a’ cleachdadh fàireagan càbaill sa mhòr-chuid airson a bhith a’ clampadh, a’ càradh, a’ dìon nan càbaill bho uisge is duslach. Tha iad air an cur an sàs gu farsaing ann an raointean leithid bùird smachd, innealan, solais, uidheamachd meacanaigeach, trèana, motaran, pròiseactan msaa.Is urrainn dhuinn fàireagan càball meatailt àrd-teòthachd a thoirt dhut le ioma-chòraichean air an dèanamh le umha nicil-plated (Òrdugh Àir .: HSM.DS-M/nxd), stàilinn gun staoin (Àireamh Òrdugh: HSMS.DS-M/nxd) agus alùmanum (Àireamh Òrdugh: HSMAL.DS-M/nxd).
| Stuth: | Corp: nickel-plated brass; seulachadh: sileaconach rubair |
| Raon Teòthachd: | Min -50℃,200 as àirde℃ |
| Ìre dìon: | IP68 (IEC60529) le O-ring iomchaidh taobh a-staigh raon clampaidh sònraichte |
| Feartan: | V0(UL94), saor bho halogen, fosfair agus cadmium, |
| Teisteanasan: | CE, RoHS, UV-resistant, aois-aghaidh. |
Sònrachadh
(Cuir fios thugainn airson tuilleadh fiosrachaidh ma tha feum agad air meudan no snàithleanan eile nach eil air an liosta a leanas.)
| Artaigil àireamh. | Snàthainn | Raon clampaidh | GL | Meud wrench | Pacaid |
|
| Tomhas | mm | mm | mm | aonadan |
| * HSM.DS-M20/5×2.5 | M20 × 1.5 | 5 × 2.5 | 7 | 22 | 32 |
| HSM.DS-M25/3×5 | M25 × 1.5 | 3 × 5 | 7 | 28 | 18 |
| * HSM.DS-M25/3×6.5 | M25 × 1.5 | 3 × 6.5 | 7 | 30/28 | 18 |
| HSM.DS-M25/4×3.5 | M25 × 1.5 | 4 × 3.5 | 7 | 28 | 18 |
| * HSM.DS-M25/4×5 | M25 × 1.5 | 4 × 5 | 7 | 28 | 18 |
| HSM.DS-M25/2×8.5 | M25 × 1.5 | 2 × 8.5 | 7 | 30 | 18 |
| * HSM.DS-M25/3×7.5 | M25 × 1.5 | 3 × 7.5 | 7 | 30 | 8 |
| HSM.DS-M32/3×8.5 | M32 × 1.5 | 3 × 8.5 | 8 | 36 | 8 |
| * HSM.DS-M32/5×5.5 | M32 × 1.5 | 5 × 5.5 | 8 | 36 | 8 |
| * HSM.DS-M40/5×8.5 | M40 × 1.5 | 5×8.5 | 9 | 45 | 8 |
| * HSM.DS-M40/3×12.5 | M40 × 1.5 | 3 × 12.5 | 9 | 45 | 8 |
| HSM.DS-M50/4×12.5 | M50 × 1.5 | 4 × 12.5 | 9 | 50/55 | 8 |
| HSM.DS-M50/5×12.5 | M50 × 1.5 | 5 × 12.5 | 9 | 60 | 2 |
| HSM.DS-M50/13×7 | M50 × 1.5 | 13 × 7 | 9 | 55 | 2 |
| * HSM.DS-P21/3×6.5 | PG21 | 3 × 6.5 | 7 | 30 | 18 |
| *HSM.DS-P21/6×6 | PG21 | 6 × 6 | 7 | 30 | 18 |
| HSM.DS-P29/3×8.5 | PG29 | 3 × 8.5 | 8 | 40/36 | 8 |
| * HSM.DS-P36/5×8.5 | PG30 | 5×8.5 | 8 | 50/45 | 4 |
| * HSM.DS-P36/3×12.5 | PG31 | 3 × 12.5 | 8 | 50/45 | 4 |
