Gland càball meatailt (snàthainn meatrach / Pg / Npt / G)
Gland càball meatailt (snàthainn meatrach / Pg / Npt / G)
Ro-ràdh
Bithear a’ cleachdadh fàireagan càbaill sa mhòr-chuid airson a bhith a’ clampadh, a’ càradh, a’ dìon nan càbaill bho uisge is duslach. Tha iad air an cur an sàs gu farsaing ann an raointean leithid bùird smachd, innealan, solais, uidheamachd meacanaigeach, trèana, motaran, pròiseactan msaa.Is urrainn dhuinn fàireagan càball meatailt a thoirt dhut air an dèanamh le umha nicil-plated (Òrdugh Àir .: HSM), stàilinn gun staoin (Àireamh Òrdugh: HSMS) agus alùmanum (Àireamh Òrdugh: HSMAL).
| Stuth: | Corp: nickel-plated brass; ròn: polyamide; seulachadh: rubair atharraichte |
| Raon Teòthachd: | Min -40℃,100 as àirde℃,Geàrr-ùine 120℃ |
| Ìre dìon: | IP68 (IEC60529) le O-ring iomchaidh taobh a-staigh raon clampaidh sònraichte |
| Feartan: | A’ seasamh an aghaidh crathadh agus buaidh, a rèir IEC-60077-1999. |
| Iarrtasan: | Togalach inneal, uidheamachd dealain, preas smachd dealain |
| Teisteanasan: | CE, RoHS, UL |
Sònrachadh
(Cuir fios thugainn airson tuilleadh fiosrachaidh ma tha feum agad air meudan eile nach eil air an liosta a leanas.)
| Gland càball umha le Nickel-plated (snàithlean meatrach) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Artaigil àireamh. | Snàthainn | Raon clampaidh | AG | GL | H | Meud wrench | Pacaid |
|
| Tomhas | mm | mm | mm | mm | mm | aonadan |
| HSM-M8 | M8x1.0 | 3~5 | 8 | 6 | 19 | 14/14 | 50 |
| HSM-M10 | M10x1.0 | 3~6.5 | 10 | 6 | 19 | 14/14 | 50 |
| HSM-M12 | M12 × 1.5 | 3~6.5 | 12 | 6 | 19 | 14/14 | 75 |
| HSM-M16-H | M16 × 1.5 | 3~6.5 | 16 | 7 | 20 | 14/18 | 75 |
| HSM-M16 | M16 × 1.5 | 4~8 | 16 | 7 | 21 | 17/18 | 75 |
| HSM-M16-D | M16 × 1.5 | 5~10 | 16 | 7 | 22.5 | 20/20 | 50 |
| HSM-M18 | M18 × 1.5 | 5~10 | 18 | 7 | 22.5 | 20/20 | 50 |
| HSM-M20-H | M20 × 1.5 | 5~10 | 20 | 7 | 22.5 | 20/22 | 32 |
| HSM-M20 | M20 × 1.5 | 6~12 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-M20-D | M20 × 1.5 | 8~14 | 20 | 7 | 23 | 24/24 | 32 |
| HSM-M22 | M22 × 1.5 | 8~14 | 22 | 7 | 23 | 24/24 | 32 |
| HSM-M24-H | M24 × 1.5 | 6~12 | 24 | 7 | 23.5 | 24/27 | 32 |
| HSM-M24 | M24 × 1.5 | 8~14 | 24 | 7 | 23 | 24/27 | 18 |
| HSM-M25-H | M25 × 1.5 | 8~14 | 25 | 7 | 23 | 24/28 | 18 |
| HSM-M25 | M25 × 1.5 | 10~16 | 25 | 7 | 24.5 | 28/28 | 18 |
| HSM-M25-D | M25 × 1.5 | 13~18 | 25 | 7 | 26 | 30/30 | 18 |
| HSM-M27-H | M27 × 2.0 | 10~16 | 27 | 8 | 24.5 | 28/30 | 18 |
| HSM-M27 | M27 × 2.0 | 13~18 | 27 | 8 | 26 | 30/30 | 18 |
| HSM-M30-H | M30 × 2.0 | 10~16 | 30 | 8 | 24.5 | 28/34 | 18 |
| HSM-M30 | M30 × 2.0 | 13~18 | 30 | 8 | 26 | 30/34 | 18 |
| HSM-M32-H | M32 × 1.5 | 13~18 | 32 | 8 | 26 | 30/36 | 18 |
| HSM-M32 | M32 × 1.5 | 15~22 | 32 | 8 | 28 | 36/36 | 18 |
| HSM-M32-D | M32 × 1.5 | 18~25 | 32 | 8 | 33 | 40/38 | 8 |
| HSM-M33 | M33 × 2.0 | 18-25 | 33 | 8 | 33 | 40/38 | 8 |
| HSM-M36-H | M36 × 2.0 | 15~22 | 36 | 8 | 28 | 36/40 | 8 |
| HSM-M36 | M36 × 2.0 | 18~25 | 36 | 8 | 33 | 40/40 | 8 |
| HSM-M40-H | M40 × 1.5 | 18~25 | 40 | 9 | 33.5 | 40/45 | 8 |
| HSM-M40 | M40 × 1.5 | 22 ~ 30 | 40 | 9 | 35.5 | 45/45 | 8 |
| HSM-M40-D | M40 × 1.5 | 22~32 | 40 | 9 | 38.5 | 50/50 | 4 |
| HSM-M42 | M42 × 2.0 | 22~32 | 42 | 9 | 38.5 | 50/50 | 4 |
| HSM-M48 | M48 × 2.0 | 22~32 | 48 | 9 | 38.5 | 50/52 | 4 |
| HSM-M50 | M50 × 1.5 | 30~38 | 50 | 9 | 40 | 58/55 | 4 |
| HSM-M56 | M56 × 2.0 | 30~38 | 56 | 9 | 40 | 58/60 | 4 |
| HSM-M60 | M60 × 2.0 | 37-44 | 60 | 10 | 41 | 65/65 | 2 |
| HSM-M63 | M63 × 1.5 | 37 ~ 44 | 63 | 10 | 41 | 65/70 | 2 |
| HSM-M63-D | M63 × 1.5 | 42 ~ 53 | 63 | 10 | 44.5 | 75/75 | 2 |
| HSM-M64 | M64 × 2.0 | 37 ~ 44 | 64 | 10 | 41 | 65/70 | 2 |
|
|
|
| |||||
| Gland càball umha le nicil (snàithlean meatrach - meud Jumbo) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Artaigil àireamh. | Snàthainn | Raon clampaidh | AG | GL | SW1/SW2 | H luach | Pacaid |
|
| Tomhas | mm | mm | mm |
|
| aonadan |
| HSM-M72-H | M72X2.0 | 52-57 | 72 | 12 | 80/80 | 43 | 2 |
| HSM-M75-H | M75X2.0 | 52-57 | 75 | 12 | 80/80 | 43 | 2 |
| HSM-M80-H | M80X2.0 | 52-57 | 80 | 12 | 80/86 | 43 | 2 |
| HSM-M72 | M72X2.0 | 55-61 | 72 | 12 | 86/86 | 43 | 2 |
| HSM-M75 | M75X2.0 | 55-61 | 75 | 12 | 86/86 | 43 | 2 |
| HSM-M80 | M80X2.0 | 55-61 | 80 | 12 | 86/86 | 43 | 2 |
| HSM-M80-D | M80X2.0 | 60-66 | 80 | 12 | 90/90 | 43 | 2 |
| Gland càball pràis le Nickel-plated (Snàithlean meatrach: snàithlean nas fhaide) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Artaigil àireamh. | Snàthainn | Raon clampaidh | AG | GL | H | Meud wrench | Pacaid |
|
| Tomhas | mm | mm | mm | mm | mm | aonadan |
| HSM-M12-L | M12 × 1.5 | 3~6.5 | 12 | 10 | 19 | 14/14 | 50 |
| HSM-M16-HL | M16 × 1.5 | 3~6.5 | 16 | 10 | 20 | 14/18 | 50 |
| HSM-M16-L | M16 × 1.5 | 4~8 | 16 | 10 | 21 | 17/18 | 50 |
| HSM-M16-DL | M16 × 1.5 | 5~10 | 16 | 10 | 22.5 | 20/20 | 50 |
| HSM-M18-L | M18 × 1.5 | 5~10 | 18 | 10 | 22.5 | 20/20 | 50 |
| HSM-M20-HL | M20 × 1.5 | 5~10 | 20 | 10 | 22.5 | 20/22 | 32 |
| HSM-M20-L | M20 × 1.5 | 6~12 | 20 | 10 | 23.5 | 22/22 | 32 |
| HSM-M20-DL | M20 × 1.5 | 8~14 | 20 | 10 | 23 | 24/24 | 32 |
| HSM-M22-L | M22 × 1.5 | 8~14 | 22 | 10 | 23 | 24/24 | 32 |
| HSM-M24-HL | M24 × 1.5 | 6~12 | 24 | 12 | 23.5 | 24/27 | 32 |
| HSM-M24-L | M24 × 1.5 | 8~14 | 24 | 12 | 23 | 24/27 | 18 |
| HSM-M25-HL | M25 × 1.5 | 8~14 | 25 | 12 | 23 | 24/28 | 18 |
| HSM-M25-L | M25 × 1.5 | 10~16 | 25 | 12 | 24.5 | 28/28 | 18 |
| HSM-M25-DL | M25 × 1.5 | 13~18 | 25 | 12 | 26 | 30/30 | 18 |
| HSM-M27-HL | M27 × 2.0 | 10~16 | 27 | 12 | 24.5 | 28/30 | 18 |
| HSM-M27-L | M27 × 2.0 | 13~18 | 27 | 12 | 26 | 30/30 | 18 |
| HSM-M30-HL | M30 × 2.0 | 10~16 | 30 | 12 | 24.5 | 28/34 | 18 |
| HSM-M30-L | M30 × 2.0 | 13~18 | 30 | 12 | 26 | 30/34 | 18 |
| HSM-M32-HL | M32 × 1.5 | 13~18 | 32 | 12 | 26 | 30/36 | 18 |
| HSM-M32-L | M32 × 1.5 | 15~22 | 32 | 12 | 28 | 36/36 | 18 |
| HSM-M32-DL | M32 × 1.5 | 18~25 | 32 | 12 | 33 | 40/38 | 8 |
| HSM-M33-L | M33 × 2.0 | 18-25 | 33 | 12 | 33 | 40/38 | 8 |
| HSM-M36-HL | M36 × 2.0 | 15~22 | 36 | 12 | 28 | 36/40 | 8 |
| HSM-M36-L | M36 × 2.0 | 18~25 | 36 | 12 | 33 | 40/40 | 8 |
| HSM-M40-HL | M40 × 1.5 | 18~25 | 40 | 15 | 33 | 40/45 | 4 |
| HSM-M40-L | M40 × 1.5 | 22 ~ 30 | 40 | 15 | 35.5 | 45/45 | 4 |
| HSM-M40-DL | M40 × 1.5 | 22~32 | 40 | 15 | 38.5 | 50/50 | 4 |
| HSM-M42-L | M42 × 2.0 | 22~32 | 42 | 15 | 38.5 | 50/50 | 4 |
| HSM-M48-L | M48 × 2.0 | 22~32 | 48 | 15 | 38.5 | 50/52 | 4 |
| HSM-M50-L | M50 × 1.5 | 30~38 | 50 | 15 | 40 | 58/55 | 2 |
| HSM-M56-L | M56 × 2.0 | 30~38 | 56 | 15 | 40 | 58/60 | 4 |
| HSM-M60-L | M60 × 2.0 | 37 ~ 44 | 60 | 15 | 41 | 65/65 | 2 |
| HSM-M63-L | M63 × 1.5 | 37 ~ 44 | 63 | 15 | 41 | 65/70 | 2 |
| HSM-M63-DL | M63 × 1.5 | 42 ~ 53 | 63 | 15 | 44.5 | 75/75 | 1 |
| HSM-M64-L | M64 × 2.0 | 37 ~ 44 | 64 | 15 | 41 | 65/70 | 2 |
| Gland càball umha nicil-plated (snàthainn PG) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Artaigil àireamh. | Snàthainn | Raon clampaidh | AG | GL | H | Meud wrench | Pacaid |
|
| Tomhas | mm | mm | mm | mm | mm | aonadan |
| HSM-P07 | PG7 | 3~6.5 | 12.5 | 6 | 19 | 14/14 | 75 |
| HSM-P09-H | PG9 | 3~6.5 | 15.2 | 7 | 20 | 14/17 | 75 |
| HSM-P09 | PG9 | 4~8 | 15.2 | 7 | 21 | 17/17 | 75 |
| HSM-P11 | PG11 | 5~10 | 18.6 | 7 | 22.5 | 20/20 | 32 |
| HSM-P13.5-H | PG13.5 | 5~10 | 20.4 | 7 | 22.5 | 20/22 | 32 |
| HSM-P13.5 | PG13.5 | 6~12 | 20.4 | 7 | 23.5 | 22/22 | 32 |
| HSM-P16-H | PG16 | 6~12 | 22.5 | 7 | 23.5 | 22/24 | 32 |
| HSM-P16 | PG16 | 8~14 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P21-H | PG21 | 10~16 | 28.3 | 7 | 24.5 | 28/30 | 18 |
| HSM-P21 | PG21 | 13~18 | 28.3 | 7 | 26 | 30/30 | 18 |
| HSM-P29-H | PG29 | 15~22 | 37 | 8 | 28 | 36/40 | 8 |
| HSM-P29 | PG29 | 18~25 | 37 | 8 | 33 | 40/40 | 8 |
| HSM-P36 | PG36 | 22~32 | 47 | 9 | 38.5 | 50/50 | 4 |
| HSM-P42 | PG42 | 30~38 | 54 | 9 | 40 | 58/58 | 2 |
| HSM-P48 | PG48 | 37 ~ 44 | 59.3 | 10 | 41 | 65/65 | 2 |
| Gland càball umha le nicil (snàthainn PG: snàithlean nas fhaide) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Artaigil àireamh. | Snàthainn | Raon clampaidh | AG | GL | H | Meud wrench | Pacaid |
|
| Tomhas | mm | mm | mm | mm | mm | aonadan |
| HSM-P07-L | PG7 | 3~6.5 | 12.5 | 10 | 19 | 14/14 | 50 |
| HSM-P09-HL | PG9 | 3~6.5 | 15.2 | 10 | 20 | 14/17 | 50 |
| HSM-P09-L | PG9 | 4~8 | 15.2 | 10 | 21 | 17/17 | 50 |
| HSM-P11-L | PG11 | 5~10 | 18.6 | 10 | 22.5 | 20/20 | 50 |
| HSM-P13.5-HL | PG13.5 | 5~10 | 20.4 | 10 | 22.5 | 20/22 | 32 |
| HSM-P13.5-L | PG13.5 | 6~12 | 20.4 | 10 | 23.5 | 22/22 | 32 |
| HSM-P16-HL | PG16 | 6~12 | 22.5 | 10 | 23.5 | 22/24 | 32 |
| HSM-P16-L | PG16 | 8~14 | 22.5 | 10 | 23 | 24/24 | 32 |
| HSM-P21-HL | PG21 | 10~16 | 28.3 | 12 | 24.5 | 28/30 | 18 |
| HSM-P21-L | PG21 | 13~18 | 28.3 | 12 | 26 | 30/30 | 18 |
| HSM-P29-HL | PG29 | 15~22 | 37 | 12 | 28 | 36/40 | 8 |
| HSM-P29-L | PG29 | 18~25 | 37 | 12 | 33 | 40/40 | 8 |
| HSM-P36-L | PG36 | 22~32 | 47 | 15 | 38.5 | 50/50 | 4 |
| HSM-P42-L | PG42 | 30~38 | 54 | 15 | 40 | 58/58 | 2 |
| HSM-P48-L | PG48 | 37 ~ 44 | 59.3 | 15 | 41 | 65/65 | 2 |
| Gland càball umha le Nickel-plated (snàthainn G) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Artaigil àireamh. | Snàthainn | Raon clampaidh | AG | GL | H | Meud wrench | Pacaid |
|
| Tomhas | mm | mm | mm | mm | mm | aonadan |
| HSM-G3/8 | G3/8" | 4~8 | 16.66 | 8 | 21 | 17/20 | 32 |
| HSM-G1/2-H | G1/2 ″ | 5~10 | 20.99 | 8 | 22.5 | 20/24 | 32 |
| HSM-G1/2 | G1/2 ″ | 6~12 | 20.99 | 8 | 23.5 | 22/24 | 32 |
| HSM-G1/2-D | G1/2 ″ | 8~14 | 20.99 | 8 | 23.5 | 24/24 | 32 |
| HSM-G3/4-TH | G3/4" | 6~12 | 26.44 | 8 | 23.5 | 22/30 | 18 |
| HSM-G3/4-H | G3/4" | 8~14 | 26.44 | 8 | 23 | 24/30 | 18 |
| HSM-G3/4 | G3/4" | 13~18 | 26.44 | 8 | 26 | 30/30 | 18 |
| HSM-G1 | G1 ″ | 18~25 | 33.24 | 9 | 33 | 40/40 | 8 |
| HSM-G1 1/4 | G1 1/4" | 22~32 | 41.91 | 10 | 38.5 | 50/50 | 4 |
| HSM-G1 1/2 | G1 1/2 ″ | 30~38 | 47.8 | 10 | 40 | 58/55 | 2 |
| HSM-G2 | G2" | 37 ~ 44 | 59.61 | 11 | 41 | 65/65 | 2 |
| Gland càball umha Nickel-plated (snàthainn NPT) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Artaigil àireamh. | Snàthainn | Raon clampaidh | AG | GL | H | Meud wrench | Pacaid |
|
| Tomhas | mm | mm | mm | mm | mm | aonadan |
| HSM-N3/8 | NPT3/8 ″ | 4~8 | 17.05 | 11 | 21 | 17/20 | 50 |
| HSM-N1/2-H | NPT1/2 ″ | 5~10 | 20.85 | 13 | 23.5 | 20/23 | 32 |
| HSM-N1/2 | NPT1/2 ″ | 6~12 | 20.85 | 13 | 23.5 | 22/23 | 32 |
| HSM-N1/2-D | NPT1/2 ″ | 8~14 | 20.85 | 13 | 23.5 | 24/24 | 32 |
| HSM-N3/4-TH | NPT3/4" | 6~12 | 26.3 | 13 | 23.5 | 22/30 | 18 |
| HSM-N3/4-H | NPT3/4" | 8~14 | 26.3 | 13 | 23 | 24/30 | 18 |
| HSM-N3/4 | NPT3/4" | 13~18 | 26.3 | 13 | 26 | 30/30 | 18 |
| HSM-N1 | NPT1 ″ | 18~25 | 33.15 | 16 | 33 | 40/40 | 8 |
| HSM-N1 1/4 | NPT1 1/4 ″ | 22~32 | 41.85 | 16 | 38.5 | 50/50 | 4 |
| HSM-N1 1/2 | NPT1 1/2 ″ | 30~38 | 47.75 | 18 | 40 | 58/55 | 2 |
| HSM-N2 | NPT2" | 37 ~ 44 | 59.55 | 18 | 41 | 65/65 | 1 |
