Gland càball meatailt àrd-temp le cridhe singilte (snàithlean meatrach)
Gland càball meatailt àrd-temp le cridhe singilte (snàithlean meatrach)
Ro-ràdh
Bithear a’ cleachdadh fàireagan càbaill sa mhòr-chuid airson a bhith a’ clampadh, a’ càradh, a’ dìon nan càbaill bho uisge is duslach. Tha iad air an cur an sàs gu farsaing ann an raointean leithid bùird smachd, innealan, solais, uidheamachd meacanaigeach, trèana, motaran, pròiseactan msaa.Is urrainn dhuinn meatailt àrd-temp a thoirt dhutfàireagan càball le cridhe singilte air a dhèanamh de umha le nicil-plated (Òrdugh Àir .: HSM.DS), stàilinn gun staoin (Àireamh Òrdugh: HSMS.DS) agus alùmanum (Àireamh Òrdugh: HSMAL.DS).
| Stuth: | Corp: nickel-plated brass; seulachadh: sileaconach rubair |
| Raon Teòthachd: | Min -50℃,200 as àirde℃ |
| Ìre dìon: | IP68 (IEC60529) le O-ring iomchaidh taobh a-staigh raon clampaidh sònraichte |
| Feartan: | |
| Teisteanasan: | CE, RoHS |
Sònrachadh
(Cuir fios thugainn airson tuilleadh fiosrachaidh ma tha feum agad air meudan no snàithleanan eile nach eil air an liosta a leanas.)
| Artaigil àireamh. | Snàthainn | Raon clampaidh | GL | (H) | Meud wrench | Pacaid |
|
| Tomhas | mm | mm | mm | mm | aonadan |
| HSM.DS-M16/7 | M16 x 1.5 | 4~7 | 7 | 20.5 | 18 | 75 |
| HSM.DS-M20/10 | M20 x 1.5 | 7~10 | 7 | 22 | 22 | 32 |
| HSM.DS-M20/13 | M20 x 1.5 | 9~13 | 7 | 22.5 | 26/24 | 18 |
| HSM.DS-M25/13 | M25 x 1.5 | 9~13 | 7 | 23 | 28 | 18 |
| HSM.DS-M25/15 | M25 x 1.5 | 12 ~ 15 | 8 | 24 | 30/28 | 18 |
| HSM.DS-M32/15 | M32 x 1.5 | 12 ~ 15 | 8 | 24 | 30/36 | 18 |
| HSM.DS-M32/18 | M32 x 1.5 | 14~18 | 8 | 25 | 36 | 18 |
| HSM.DS-M32/22 | M32 x 1.5 | 18~22 | 8 | 27 | 40/38 | 8 |
| HSM.DS-M40/22 | M40 x 1.5 | 18~22 | 9 | 26 | 40/45 | 8 |
| * HSM.DS-M40/25 | M40 x 1.5 | 21~25 | 9 | 27 | 45 | 8 |
| * HSM.DS-M40/30 | M40 x 1.5 | 25 ~ 30 | 9 | 28 | 50/46 | 8 |
| * HSM.DS-M50/30 | M50 x 1.5 | 25 ~ 30 | 9 | 28 | 50/55 | 8 |
| * HSM.DS-M50/34 | M50 x 1.5 | 29~34 | 9 | 29 | 55 | 8 |
| * HSM.DS-M50/37 | M50 x 1.5 | 32 ~ 37 | 9 | 29 | 55 | 8 |
| * HSM.DS-M56/37 | M56 x 1.5 | 32 ~ 37 | 9 | 29 | 55/60 | 2 |
| HSM.DS-M56/40 | M56 x 1.5 | 35~40 | 9 | 32 | 60 | 2 |
| * HSM.DS-M56/43 | M56 x 1.5 | 38 ~ 43 | 10 | 32 | 65 | 2 |
| * HSM.DS-M63/43 | M63 x 1.5 | 38 ~ 43 | 10 | 31.5 | 65/70 | 2 |
| * HSM.DS-M63/46 | M63 x 1.5 | 41~46 | 10 | 31.5 | 70 | 2 |
| * HSM.DS-M63/51 | M63 x 1.5 | 45~51 | 10 | 35 | 75 | 2 |
